I'm replacing the glass on a Sprint Samsung Galaxy Nexus. I noticed the replacement glass I purchased has no sticky side so I was wondering what was the proper method of attaching the glass for this model. I have some of that double sided sticky tape about 3mm wide that is left over from glass repair kit for the Samsung S3. Presumably, this would go around the perimeter while the clear part of the glass would not be bonded.
Or I could also buy some UV LOCA adhesive for cell phones and glue the entire surface of the digitizer.
..and perhaps cure the adhesive by putting the phone in one of the tanning beds at my gym.
I have successfully done a glass replacement on an S3, so I probably have a good chance of doing of not botching this if I go slow.
Or I could also buy some UV LOCA adhesive for cell phones and glue the entire surface of the digitizer.
..and perhaps cure the adhesive by putting the phone in one of the tanning beds at my gym.
I have successfully done a glass replacement on an S3, so I probably have a good chance of doing of not botching this if I go slow.
Aucun commentaire:
Enregistrer un commentaire