XT1032 Bootloop after recovering backup

Hi everyone,

I was gonna update to a new version of CM12.1 (was originally using the 27/08 version, and i was gonna update to 30/09 version). So I made a backup, then I tried to restore it, because last time I updated, the update failed and the backup was bad too. So, I restored it, and then the phone went into a bootloop. When I tried to boot into Recovery (Fastboot -> Recovery), it would reboot and get stuck, then reboot again.

The things I did in order:
Try to get into bootloader a couple of times
Reflash TWRP in fastboot (fastboot flash recovery twrp.img, was version 2.8.6.0)
cmd: fastboot erase recovery
cmd: fastboot erase cache
Flash TWRP again
cmd: fastboot erase system
Flash CyanogenMod Recovery
I can boot into that now
Try to flash CM12.1 nightly 30/09
Factory Reset (Recovery crashes before it is completed)
cmd: fastboot erase data (I get this error in the cmd:
erasing 'data' . . .
(bootloader) Invalid partition name data
FAILED (remote failure)
finished. total time: 0.016s

I just get 'cmd: erase:data' with no error in the fastboot.)

So I think the problem is in the data partition, but I don't know how to fix this.

Thanks in advance!

Best Kernel for AOSP 5.1.1 XT1032

Hello guys, i just flashed pretty much it stock 5.1.1 AOSP ROM but i want to give it a little boost so what kernel to use ?

Stock ROM XT1032

Links ?

Enviado de meu Moto G usando Tapatalk

xt1032 bricked - Help

Unfortunately I made a mistake at the time of reinstalling the stock rom for xt1032 and ended up using the rom xt1039 stock . The phone now does not start , leaving the fastboot screen and occurs when I try to "boot up failed" .

When I try to retake the boot also gives error.

mfastboot.exe flash boot boot.img
target max- sparse -size : 256MB
sending ' boot' ( 10240 KB ) ...
OKAY [ 0.391s ]
writing 'boot ' ...
( bootloader ) Preflash validation failed
FAILED (remote failure )
finished. Total time: 0.875s

someone could help me ?

[MOTO G] XT1032 black screen after booting up

Hello there,

after booting up the phone (Android 5.0.2), the screen turs black (with backlight), becomes warm over time and reboots, no input possible.
I've read almost any post about that problem but nothing helped. I dont know how that problem happened, nothing unusual happened.
At first, i tried booting into bootloader and used there
- Normal Bootup -> booting up with same problem
- factory -> booting up with same problem
- recovery -> "bootup failed"
- barcodes -> Showing barcodes with Informatios (IMEI, Model No. ...)
- QCOM -> booting up with same problem
- BP Tools -> booting up with same problem

So i successfully unlocked the phone (Code 3, warranty was already over) to install the stock recovery -> Success, booting in recovery displaying "no Command". (waiting and then press power and vol. up get me into recovery). Then, i tried to install custom recovery (TWRP and CWM), the log on Phone says "mismatched partition size" but no errors, CMD says OK [...] OK.
Booting in Recovery -> "No Command" no matter what recovery i had flashed.

Booting an recovery out of CMD with "fastboot boot recovery.img" works for twrp-2.8.7.0.-falcon_GPE.img.
Doing "Factory reset with swipe" gives:

Updating Partition details...
E: unable to stat '/data/data/com.google.android.gms/sharedprefs/checkin.xml' other errors concerning '/data/data/com.cleanmaster.mguard[...]'
E: unable to open '/cache/recovery/.version'
MTP Enabled
but it has done factory reset. Trying to mount and send a custom firmware to SD results in error, device not responding.
Formatting data has failed with same errors as above (E: unable to ... '/data/data/[...])

The folder cant removed due to:
E:rm -rf "/data/data/com.cleanmaster.mguard" process ended with ERROR=1

Next, i tried to flash the Stock firmware (im from Germany, it was an O2-Promo with Google play) "XT1032_FALCON-O2DE_5.0.2_LXB22.46-28.1_1_cid7_CFC_1FF.xml.zip" with fastboot and mfastboot.V2. No errors from CMD, log on Phone wrote sometimes in purple "Image Size too big", but no errors. Wipe user and wipe cache, then reboot, no success.
I've tried many other firmware versions (EU and DE only, Lollipop and KitKat) step by step for each instruction with fastboot, also no success.

It seems that the write operations take no effect, even erasing partitions like recovery only displays on CMD

erasing 'recovery'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.031s]
finished. total time: 0.031s

without any effect, stock ercovery remains there, but the phone is unlocked. Now i dont know how to move on anymore, after working on the phone for 7 Hours.
Can you, the experts on XDA, help me? If needed, i can post more informations...